high temperature life
英 [haɪ ˈtemprətʃə(r) laɪf]
美 [haɪ ˈtemprətʃər laɪf]
高温下使用寿命
双语例句
- Some metals, such as cobalt, nickel, chrome and so on, can corrade the element in high temperature melting state and affect the service life of element.
部分金属如钴、镍、铬等在高温熔化状态可以对元件造成侵蚀，影响元件的寿命。 - After analyzing the build-up technology will be adopted to improve the wear-resistance of high temperature and its service life.
分析后决定采用堆焊工艺提高减径环的高温耐磨性和使用寿命。 - Especially suitable for life, to general mineral to color black and sludge and repeat the operating environment, and high temperature to filter under the condition of life is more suitable.
特别适用于令一般矿物质寿命缩短、颜色变黑和容易产生油泥的重复合和高温的操作环境，以及令过滤器寿命缩短的情况下更为适合。 - An Assessment Method of High Temperature Creep Life of Steam Turbine Diaphragm
汽轮机隔板高温蠕变寿命评估方法的研究 - The utility model has the advantages of acid resistance, alkali resistance, corrosion resistance and high temperature resistance, and can prolong service life of a water well.
本实用新型具有耐酸、耐碱、耐腐蚀、耐高温，大大延长水井使用寿命的特性。 - High temperature fatigue creep behavior and life prediction of 316L stainless steel under 2-step load
316L不锈钢的高温疲劳蠕变行为和寿命预测 - Analysis of High Temperature Failure and Service Life of Magnesium Metallurgy Pot
钢的氧化物冶金技术炼镁还原罐高温失效与使用寿命分析 - The high temperature low cycle fatigue life of the 2nd stage turbine blade in an aircraft engine in service has been evaluated by use of the experimental method, in which the effect of creep has been considered.
利用试验方法确定了某型发动机级涡轮叶片高温低循环疲劳寿命，试验计入了高温蠕变的影响。 - High temperature boiler tube life prediction techniques and their applications
高温锅炉管寿命预测技术及其应用 - The flower bud died, the flower did not bloom under high temperature and short pollen grain life of the male parent were the most important factors to decrease the bearing rate.
高温下造成母本死蕾和闭花以及父本花粉寿命缩短是结实率下降的重要原因。 - Plasma cladding is applied to co-based materials in power plant valve, which played an important role in improving the materials performance of wear-resisting, anti-corrosion and high temperature resistance, prolonging service life, saving expensive materials and reducing production cost.
通过堆焊Co基合金的方式显著提高了阀门密封面耐磨损、耐腐蚀性能及高温性能，延长了使用寿命，节省贵重材料，并降低了产品成本。 - In view of the high light-off temperature and short service life of alum catalyst made in China which is used in the production of sulfuric acid, the development of cesium catalyst using cesium salt as solubility promoter and cerium salt as additive is proposed.
针对国产的硫酸生产用钒催化剂起燃温度高、使用寿命短，提出以铯盐为助溶剂、铈盐为添加剂，研制了铯催化剂。 - High Temperature Low Cycle Fatigue Life Prediction Models
高温低周疲劳寿命预测模型 - The authors of this paper bring forward a calculation method for life span of boiler high temperature part to forecast the life span of these components.Fig1.
作者提出了锅炉高温受热部件寿命的一种计算方法，用于预测这些部件的寿命。 - Application of Damage Mechanics and High Temperature Fracture Mechanics to the Life Expectancy of Boiler Piping
损伤力学和高温断裂力学在锅炉管道断裂寿命评定中的应用 - High Temperature Low Cycle Fatigue Life Prediction and Verification of Thin Wall Components
薄壁构件的高温低周疲劳寿命的预测与验证 - In this paper, high temperature and high-pressure components fitting for life assessment such as main steam pipeline and boiler tube were selected for life management studying.
本课题选取适合寿命评估的高温高压部件，如主蒸汽管道及过热器管进行寿命管理研究。 - The results of the comparison between computing values and experimental values are satisfactory. That means these three life estimating methods can be used directly to the prediction of high temperature and low cycle fatigue life for practical units under complicated stress state.
解析值与实测值的对比结果令人满意，说明此三种寿命评价法可直接用于实际装置在复杂应力状态下的高温低周疲劳寿命预测。 - Experimental Evaluation of High Temperature Low Cycle Fatigue/ Creep Life of Turbine Blade
涡轮叶片高温低循环疲劳/蠕变寿命试验评定 - The strain ratio of minimum to maximum strain is-1.0.The influence of the above two loading cycle on cyclic stress response behavior, mechanism of fracture at high temperature and fatigue life was investigated.
考察了两种载荷波形下材料的循环应力响应行为和高温疲劳断裂机理以及载荷波形对疲劳寿命的影响。 - It is put out that the injector and extruder are strengthened on the surface by laser surface alloy to improve its high temperature abrasion and lengthen life of the injector.
提出了采用激光表面合金化的方法对注塑机和挤出机螺杆表面进行强化，以提高其抗高温粘着磨损性能，延长注塑机使用寿命。 - Tt is necessary to select refractories carefully in order to meet the requirements for high temperature hot blast and long life of hot blast stove.
为了满足热风炉高风温和长寿的需要，必须认真选择耐火材料。 - The individual cycle-strain hysteresis loops were recorded, and the cycling response and high temperature low cycle fatigue life were obtained.
记录了各自的循环应力&应变滞后环，得出了试样的循环响应特征和各试样的高温低周疲劳寿命。 - As the iron-based crucible for melting magnesium and its alloys is easy to oxide and erode. at high temperature, the service life of ferruginous crucible and the quality of magnesium alloy are severely affected.
镁及镁合金熔炼用铁质坩埚在高温下易氧化腐蚀，严重影响坩埚的使用寿命和合金的质量。 - The technology of high temperature preheating and high temperature and long campaign life hot blast stove had been adopted during the Shougang's No. 2 BF technology rebuild design.
首钢2号高炉技术改造设计采用了高温预热及高风温长寿热风炉技术。 - The Prediction System Design of High Temperature Furnace Tubes Life
高温炉管寿命预测系统的设计 - Application of Top Combustion Hot Stove with High Temperature and Long Life
高温长寿型顶燃式热风炉的应用 - Effect of cyclic stress amplitude and mean stress on high temperature fatigue life of ni_3al ( b) alloy
循环应力幅和平均应力对Ni3Al（B）合金高温疲劳寿命的影响 - The too low mold temperature brings about the feeding difficulties, while the too high mold temperature reduces the operation life span of the mold and results in the coarse grains of the alloy.
挤压铸造模具温度过低补缩困难；过高则降低模具的使用寿命，并使得合金的组织粗大。 - The currently used in high temperature flue gas processing fabric are mostly glass fiber coated ( PTFE membrane) filter material, but because PTFE membrane filter material is very thin, very easy to fall under the environment of high temperature, lower filter material using life.
目前用在高温烟气处理的滤料大多是玻璃纤维覆膜（PTFE膜）滤料，但由于PTFE膜滤料很薄，很容易在高温环境下脱落，降低滤料的使用寿命。